Setting up a Remote Finger Sensor Clock

The PayClock Online Agent is required to communicate with your Remote Finger Sensor. It must be installed on a Windows computer that the clock is connected directly to. Follow these steps to complete the setup of the Remote Finger Sensor:

1. Download and run the Setup Assistant.
2. Press Next. Check the box and press Next again.
3. Enter your login credentials for PayClock Online. Press Login.
4. Press Next unless you are migrating data from an older version of PayClock.
5. Press Next unless you intend to export on the same computer used to manage your Remote Finger Sensor.
6. Click on the box for the Remote Finger Sensor and press Next.
7. Press Next. After confirming the type of clock that is to be installed press Next again.
8. Verify that your Remote Finger Sensor is not plugged into your computer and press Next.
9. Press Install. At the end of the installation press Next.
10. Plug your Remote Finger Sensor into your computer. After the drivers finish loading it will automatically sync with PayClock Online.
11. Press Next and reboot your computer if prompted. After your computer has finished rebooting, your clock will be ready to use.

Mon 08/22/2022